*shown with optional Magnetic Stripe Reader Speaker Bar/ Barcode Scanner and Fingerprint Reader (optional Customer Display also available) Touchmonitor User Guide 1729L 17¨ LCD Desktop Touchmonitor (Optional Magnetic Stripe Reader, Customet Display, Barcode Scanner and Fingerprint Reader available)
Elo TouchSystemsTouchmonitor User Guide 17" LCD Desktop 1729L Revision C P/N E488297 Elo TouchSystems. 1-800-557-1458 www.elotouch.
Copyright © 2008 Tyco Electronics. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo TouchSystems. Disclaimer The information in this document is subject to change without notice.
Table of Contents Chapter 1 Introduction 1 Product Description ................................................. 1 Detailed LCD Display Performance Requirements .......................................................... 2 Customer Display .............................................. 3 USB Version ................................................... 3 Fingerprint Reader ............................................ 3 Magnetic Stripe Reader .................................... 4 Speaker Bar ...............
Appendix B Touchmonitor Safety 37 Care and Handling of Your Touchmonitor .......... 38 Appendix C Technical Specifications Touchmonitor Specifications ......................... AccuTouch Touchscreen Specifications ................................................ IntelliTouch Touchscreen Specifications ................................................ Infrared Touchscreen Specifications ................................................ Acoustic Pulse Recognition Specifications ..............................
C H A P T E R 1 INTRODUCTION Product Description The 1729L consists of a 17.0” LCD main display with a touchscreen and the following optional peripherals: customer display, vacuum fluorescent display (VFD), fingerprint reader, barcode scanner, magnetic stripe reader (MSR), speaker bar and a 6 port USB (USB version only) Hub. The main display element is a 17.0 inch diagonal SXGA resolution (1280 x 1024) LCD display. Three types of touchscreens can be selected in the 1729L as options.
Detailed LCD Display Performance Requirements 17 inch TFT LCD Display Panel Display Format Display area 17” 1280 x 1024 337.92mm(H) x 270.336mm(V) Pixel Pitch 17” Contrast Ratio 0.264mm(H) x 0.264mm(V) 800:1 typical Brightness No Touchscreen 300 cd/m2 (Typical) AccuTouch IntelliTouch 240 cd/m2 (Typical) 270 cd/m2 (Typical) CarrollTouch Surface Capacitive 270 cd/m2 (Typical) 249 cd/m2 (Typical) Acoustic Pulse Recognition Response Time 270 cd/m2 (Typical) Tr=3.5 msec/Tf=3.
Customer Display The Customer Display is a twenty character two line vacuum fluorescent display (VFD). It consists of a VFD and VFD controller. USB Version Optional Parameters Characters per row Number of rows Character configuration Character Height Character width Character configuration Character color MTBF 20 2 5x7 dot matrix 9.5mm 6.2mm ASCII Blue green 300,000 hours Fingerprint Reader The fingerprint reader will be ELO part number E728123 (DigitalPersona U.are.U 4000B).
Magnetic Stripe Reader The MSR is a USB 1.1 device which reads all three data stripes on standard credit cards or driver’s licenses conforming to ISO/ANSI standards. The MSR will have foreign language capability. The credit card is read by sliding the credit card through the MSR, stripe side toward the display, forward or backward. The MSR is powered from the USB port; no external power is needed.
2.Omni-Directional scanner (Elo P/N E787026) specifications. a. Ability to generate omni-directional scanning pattern b. Maximum performance c. 2-D scanning ability (PDF417, MicroPDF) d. USB powered e. Easy communication between host and scanner f. Visible laser diode operating at 650nm g. 600+ scans/sec h. RoHS-compliant 3.USB-SSI converter board (Elo P/N E580321) specifications a. Ability to convert from serial interface to USB interface and vice versa. b. Compact size c. Input Voltage: 5V d.
1-6 Elo Touchmonitor User Guide
C H A P T E R 2 INSTALLATION AND SETUP This chapter discusses how to install your LCD touchmonitor and how to install Elo TouchSystems driver software.
Product Overview Main Unit Note: Shown with optional peripherals Rear View 2-8 Elo Touchmonitor User Guide
Side View Base Bottom View 2-9
2-10 Elo Touchmonitor User Guide
2-11
TM Kensington Lock The KensingtonTM lock is a security device that prevents theft. To find out more about this security device, go to http://www.kensington.com.
USB Interface Connection Your touchmonitor comes with only one touchscreen connector cables: USB cable. (For Windows 2000, Me and XP systems only.) To set up the display, please refer to the following figures and procedures: Remove the Cable Cover The cables are connected at the back of the monitor. To remove the cover, grasp the lip of the cover and pull towards you until it snaps.
CAUTION Before connecting the cables to your touchmonitor and PC, be sure that the computer and touchmonitor are turned off. NOTE Before connecting the cables to the touchmonitor, route all the cables through the hole in the second as shown in the picture above.
CONNECTIONS ON UNDERSIDE POWER POWER POWER CABLE Connect one end of the power cord to the monitor and the other end to wall. Connect the power cable to the power port in the monitor.
CONNECTIONS ON UNDERSIDE VIDEO PORT FEMALE 15-PIN VIDEO CONNECTOR VIDEO CABLE CONNECTIONS ON UNDERSIDE DVI PORT DVI 24-PIN CONNECTOR DVI CABLE Connect one end of the video cable to the rear side of computer and the other to the LCD. Tighten by turning the two thumb screws clockwise to ensure proper grounding. You can select DVI video cable or D-SUB15 video cable.
CONNECTIONS ON UNDERSIDE SPEAKER PORT SPEAKER CABLE Connect one end of the speaker cable to the speaker port in the computer and the other end to the port in the monitor.
CONNECTIONS ON UNDERSIDE USB CONNECTOR USB TOUCHSCREEN CABLE Connect one end of the USB cable to the rear side of the computer and the other to the LCD monitor. The USB cable is for optional touch, MSR, CD and Finger Print Reader. Only one USB cable is needed because the device contains a self powered USB 1.1 Hub. Two self powered ports are available for running other USB devices. For touch only, no USB Hub is present.
Replace the Cable Cover Then you have attached all the cables to the monitor, gently bring all the cables toward the standard so they fit under the cover lip. Snap the Cable cover in place over the connections.
Optimizing the LCD Display To ensure the LCD display works well with your computer, configure the display mode of your graphic card to make it less than or equal to 1280 x 1024 resolution, and make sure the timing of the display mode is compatible with the LCD display. Refer to Appendix A for more information about resolution. Compatible video modes for your touchmonitor are listed in Appendix C. Installing the Peripheral Device Drivers Finger Print Reader Driver Installation: 1.
Magnetic Stripe Reader No device are needed. Testing the USB MSR Keyboard Emulation 1 Plug in the device. 2 Open MS Word. 3 Slide the card through the MSR to view the data. Testing the USB-HID Class MSR 1 On the CD, browse to Touch Monitor Peripherals\Magnetic Stripe Card Reader (MSR)\Demo. 2 Open the Readme.txt and follow instructions to test the unit. Converting MSR from HID to Keyboard Emulation 1. On the CD, browse to Touch Monitor Peripherals\Magnetic Stripe Card Reader (MSR) \HID to KB Converter.
Barcode Scanner Driver Installation: 1. 2. 3. 4. Insert your Elo TouchTools CD. On the CD, browse to Touch Monitor Peripherals\Barcode Scanner Startup\Drivers. Double-click on USB7210.msi and follow the prompts given by the setup file. Once you have finished installing the above: Right click on My Computer and click on Properties. Click on the Hardware tab and then click Device Manager. 5. Double click on USB7210 Converter Module, which should be located in the Other Devices section.
The Scan Engine turns on the laser and is able to scan and decode barcodes continuouslywithout the user having to press the trigger (momentary switch). When the Host Appli-cation software detects the DSR input HIGH (HE Switch is OFF), it sends a ‘LevelTrigger’ SSI command to the Symbol Scan Engine. The Scan Engine turns off the laserand will scan and decode barcodes only when the trigger is activated. Enable 2-D Scanning: Your scanner default settings do not enable 2-D barcode reading ability.
Customer Display Driver Installation: 1. Insert your Elo TouchTools CD. 2. On the CD, browse to Touch Monitor Peripherals\Rear Facing Customer Display\Drivers\USB Drivers. Click on the folder that has the name of your operating system for the necessary drivers. 3. Once in this folder, open up the zip file and open the install text file for further driver installation instructions.
Installing the Touch Driver Software Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operating systems: • Windows XP • Windows 2000 • Windows Me • Windows 98 • Windows 95 • Windows NT 4.0 • CE 2.x, 3.0, 4x • Windows XP Embedded • Windows 3.
Installing the USB Touch Driver Installing the USB Touch Driver for Windows XP, Windows 2000, Me and 98 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If Windows XP, Windows 2000,Windows 98, or Windows Me starts the Add New Hardware Wizard: 2 Choose Next. Select “Search for the best driver for your device (Recommended)” and choose Next. 3 When a list of search locations is displayed, place a checkmark on “Specify a location” and use Browse to select the \EloUSB directory on the Elo CD-ROM.
C H A P T E R 3 OPERATION About Touchmonitor Adjustments Your touchmonitor will unlikely require adjustment. Variations in video output and application may require adjustments to your touchmonitor to optimize the quality of the display. For best performance, your touchmonitor should be operating in native resolution, that is 1280 x 1024 at 60-75 Hz. Use the Display control panel in Windows to choose 1280 x 1024 resolution. Operating in other resolutions will degrade video performance.
17” LCD Function Key MENU 5 4 3 User Control SELECT 2 1 1 Controls Power Switch Function Turns the display system power on or off. 2 Select Displays the OSD menus on the screen and used to select (“Clockwise” and “Counter-clockwise” direction) the OSD control options 3 on the screen. Adjusts the decreasing value of the selected 4 OSD control option. Adjusts the increasing value of the selected OSD control option. 5 Menu Menu display and menu exit.
Controls and Adjustment OSD Lock/Unlock You are able to lock and unlock the OSD feature. The monitor is shipped in the unlocked position. To lock the OSD: 1 Press the Menu button and button simultaneously for 2 seconds. A window will appear displaying “OSD Unlock”. Continue to hold the buttons down for another 2 seconds and the window toggles to “OSD Lock”. Power Lock/Unlock You are able to lock/unlock the Power feature. The monitor is shipped in the unlockedposition.
OSD Control Options Brightness • Background Luminance of the LCD panel is adjusted. Contrast • Adjusts the contrast or the values of color gain (RED, GREEN or BLUE). V-Position • Moves the screen up or down. H-Position • Moves the screen left or right. Recall Defaults • All data copy from factory shipment data. Color Temperature • Press or to select 9300, 6500, 5500, 7500 and user. Only when selecting user you can malce adjustments to the R/G/B content.
Power-Save (No Input) • The LCD panel background is cut when there is no signal input (AC line power consumption of 4w or less). Power LED Display & Power Saving General Power Saving Mode When the power switch are switch on, this LED lights in green. The LED indicates the different power status with altered LED colors when monitor operates in different modes (see following table). Mode On Sleep Off Power Consumption 45w max. 4w max. 2w Indicator Green Orange NO Tested with the USB cable unplugged.
CAUTION In order to protect the LCD, be sure to hold the base when adjusting the LCD, and take care not to touch the screen.
C H A P T E R 4 TROUBLESHOOTING If you are experiencing trouble with your touchmonitor, refer to the following table. If the problem persists, please contact your local dealer or our service center. Elo Technical Support numbers are listed on the last page of this manual. Solutions to Common Problems Problem Suggestion(s) The monitor does not respond after Check that the monitor’s Power Switch is on. you turn on the system.
4-34 Elo Touchmonitor User Guide
C H A P T E R A NATIVE RESOLUTION The native resolution of a monitor is the resolution level at which the LCD panel is designed to perform best. For the Elo LCD touchmonitor, the native resolution is 1280 x 1024 for the SXGA-17 inch size. In almost all cases, screen images look best when viewed at their native resolution. You can lower the resolution setting of a monitor but not increase it.
As an example, a SVGA resolution LCD panel has 800 pixels horizontally by 600 pixels vertically. Input video is also represented by the same terms. XGA input video has a format of 1024 pixels horizontally by 768 pixels vertically. When the input pixels contained in the video input format match the native resolution of the panel, there is a one to one correspondence of mapping of input video pixels to LCD pixels.
C H A P T E R B TOUCHMONITOR SAFETY This manual contains information that is important for the proper setup and maintenance of your touchmonitor. Before setting up and powering on your new touchmonitor, read through this manual, especially Chapter 2 (Installation), and Chapter 3 (Operation). 1 To reduce the risk of electric shock, follow all safety notices and never open the touchmonitor case. 2 Turn off the product before cleaning 3 Your new touchmonitor is equipped with a 3-wire, grounding power cord.
Care and Handling of Your Touchmonitor The following tips will help keep your Elo touchmonitor functioning at the optimal level. • To avoid risk of electric shock, do not disassemble the brick supply or display unit cabinet. The unit is not user serviceable. Remember to unplug the display unit from the power outlet before cleaning. • Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air.
C H A P T E R C TECHNICAL SPECIFICATIONS Display Modes Your Elo touchmonitor is compatible with the following standard video modes: Item Resolution Type H. Scan(KHz) V. Scan(Hz) 1 2 640 x 350 720 x 400 VGA 70Hz VGA 70Hz 31.47 31.47 28.322 28.322 Pol. 3 4 640 x 480 640 x 480 VGA 60Hz MAC 66Hz 31.47 35 25.175 32.24 -/- 5 6 640 x 480 640 x 480 VESA 72Hz VESA 75Hz 37.86 37.5 31.5 31.5 -/-/- 7 8 800 x 600 800 x 600 VESA 56Hz VESA 60Hz 35.16 37.
Touchmonitor Specifications Model LCD Display Display Size Pixel Pitch Display Mode Native Contrast Ratio Brightness No Touchscreen AccuTouch IntelliTouch CarrollTouch Surface Capacitive Acoustic Pulse Recognition Response Time Display Color Viewing Angle Input Signal VGA Analog Video Sync DVI Video Signal Connector Front Control OSD Plug & Play Touch Panel (optional) Power Operating Conditions Temp Humidity Dimensions (HxWxD) Weight (Net) Certifications C-40 Elo Touchmonitor User Guide 1729L 17.
Power Supply Specification The Touchcomputer shall be powered by 12VDC from a universal type power supply brick with the following characteristics: Input voltage 100 to 240 V~ Input frequency 50/60 Hz Output voltage 12 V Output line and load regulation +/- 5% Output current=10 Amps maf
AccuTouch Touchscreen Specifications MECHANICAL Construction Top: Polyester with outside hard-surface coating with clear or antiglare finish. Inside: Transparent conductive coating. Bottom: Glass substrate with uniform resistive coating. Top and bottom layers separated by Elo-patented separator dots. Positional Accuracy Standard deviation of error is less than 0.080 in. (2.03 mm). This equates to less than ±1%.
IntelliTouch Touchscreen Specifications MECHANICAL Positional Accuracy Standard deviation of error is less than 0.080 in. (2.03 mm). Equates to less than ±1%. Touchpoint Density Touch Activation Force More than 100,000 touchpoints/in2 (15,500 touchpoints/cm2). Typically less than 3 ounces (85 grams). Surface Durability Expected Life Performance Surface durability is that of glass, Mohs’ hardness rating of 7. No known wear-out mechanism, as there are no layers, coatings, or moving parts.
Infrared Touchscreen Specifications MECHANICAL Input Method Electrical Input Method Finger or gloved hand activation Positional Accuracy Resolution Typical centroid accuracy: 2 mm with 1 mm STD error Touchpoint density is based on controller resolution of 4096 x Touch Activation Force 4096 No minimum touch activation force is required Controller OPTICAL Board: USB 1.
Acoustic Pulse Recognition Specification MECHANICAL Input method Finger, finger nail, gloved hand, or stylus activation ELECTRICAL Position accuracy 1% max. error Resolution accuracy Touch activation force Touchpoint density is based on controller resolution of 4096 x 4096 Typically 2 to 3 ounces (55 to 85 grams) Controller OPTICAL Board: USB 1.
17” LCD Touchmonitor(ET1729L-XXXA-1-XX-XX-G) Dimensions 17” LCD Touchmonitor(ET1729L-XXXA-1-XX-G) Dimensions C-45
REGULATORY INFORMATION I. Electrical Safety Information: A) Compliance is required with respect to the voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified herein will likely result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed. B) There are no operator serviceable parts inside this equipment.
This Information Technology Equipment (ITE) is required to have a CE Mark on the manufacturer’s label which means that the equipment has been tested to the following Directives and Standards: This equipment has been tested to the requirements for the CE Mark as required by EMC Directive 89/336/EEC indicated in European Standard EN 55 022 Class B and the Low Voltage Directive 73/23/EEC as indicated in European Standard EN 60 950.
"The application of this monitor is restricted to special controlled luminous environments.The screen surface trend to reflect annoying light of lamps and sunlight. To avoid these reflections the monitor should not be positioned in front of a window or directed to luminaries. The monitor is in compliance with Reflection Class III according to ISO 13406-2" "Die Anwendung dieses Bildschirms ist auf speziel kontrollierte Umgebungsbeleuchtungen eingeschränkt.
50 Elo Touchmonitor User Guide
WARRANTY Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. With the exception of the negotiated warranty periods; the warranty for the touchmonitor and components of the product is 2 years. Seller makes no warranty regarding the model life of components. Seller’s suppliers may at any time and from time to time make changes in the components delivered as Products or components.
THESE REMEDIES SHALL BE THE BUYER’S EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY. EXCEPT FOR THE EXPRESS WARRANTY SET FORTH ABOVE, SELLER GRANTS NO OTHER WARRANTIES, EXPRESS OR IMPLIED BY STATUTE OR OTHERWISE, REGARDING THE PRODUCTS, THEIR FITNESS FOR ANY PURPOSE, THEIR QUALITY, THEIR MERCHANTABILITY, THEIR NONINFRINGEMENT, OR OTHERWISE. NO EMPLOYEE OF SELLER OR ANY OTHER PARTY IS AUTHORIZED TO MAKE ANY WARRANTY FOR THE GOODS OTHER THAN THE WARRANTY SET FORTH HEREIN.
INDEX Numerics F 17.
O T One-Dimensional scanner specifications, 4 Omni-Dimensional scanner specifications, 4 Optical, AccuTouch, 41 Optical, IntelliTouch, 42 Optical, IR, 43 Optimizing the LCD Display, 20 OSD Control Options, 30, 34 OSD Lock/Unlock, 29 OSD Menu Functions, 29 OSD Position, 30 OSD Timeout, 30 Technical Specifications, 39 Testing Applications, 24 Testing the USB MSR Keyboard Emulation, 21 Testing the USB-HID Class MSR, 21 Theory of Operation, 4 Touch Activation Force, AccuTouch, 41 Touch Activation Force, Inte
Check out Elo’s Web site! www.elotouch.com Get the latest... • Product information • Specifications • News on upcoming events • Press release • Software drivers • Touchmonitor Newsletter Getting in Touch with Elo To find out more about Elo’s extensive range of touch solutions, visit our Web site at www.elotouch.
