Owners manual

User Manual: 90 Series
UM600050 Rev D, page 5 of 25
Connector Panel & Interfaces
12V DC IN DP VGA OSD Connector Touch USB
COM
Touch Display Connections
1. Connect the DP or VGA video cables between the monitor’s DP/VGA input connectors and your DP/VGA
video source. Tighten the video cable’s screws for best performance on VGA connector.
2. Connect the USB touch cable between the monitor’s USB connector and your PC’s USB port. (Not applicable for EXX9XL-0NXX models)
3. Connect a 12VDC power supply to the monitor’s input power jack.
4. The touch display ships in an ON state, video should be displayed on your monitor already.