Technical information

7
Termography of an ADS-168 Storage Heater
As part of one of the tests carried out on an ADS static storage
heater of 1600W output this thermographic image was
obtained, which shows the high e ciency of the insulation with
which the ADS storage heaters are  tted. The areas coloured
the same maintain the same surface temperature.
The equivalency of colours and temperatures is refl ected in the
righthand column. The ADS storage heaters show in this way
the high degree of control of the energy maintained inside. The
heat rises through the upper grille and the remainder of the
heater is kept at an even temperature.
Section of an ADS-168 Storage Heater
1
Vermiculite insulation.
2
Automatic damper control.
3
Bimetal regulator.
4
Charging thermostat.
5
Charging sensor phial.
6
Lateral insulation of ecological  bre.
7
Rear air chamber.
8
Rear insulation of ecological  bre.
9
Rear 12 mm Microtherm G insulation.
10
Heating Elements.
11
Lower vermiculite insulation.
12
High density magnetite refractory.
13
Safety thermostat.
14
Front 12 mm Microtherm G insulation.
15
Front air chamber.
16
Side air chamber.
Model ADS-84 ADS-124 ADS-168 ADS-208 ADS-2412 ADS-2812 ADS-3216
Input (W) 800 1200 1600 2000 2400 2800 3200
Acumulated energy kWh 6,4 9,6 12,8 16,0 19,2 22,4 25,6
Total weight (kg) 48 69 88 109 129 150 169
Lenght (cm) 31,5 43 54 65 76,5 88 99
Width (cm)* 16,5 16,5 16,5 16,5 16,5 16,5 16,5
Height (cm) 72,5 72,5 72,5 72,5 72,5 72,5 72,5
Number of blocks
4 – 8 4 12 8 16
(unit weight 8,5 kg)
Number of blocks
– 4 – 4 – 4 –
(unit weight 13 kg)
Units per pallet:
- 1200x800 mm. 24 10 10
- 1200x1000 mm. 20 20 10 10
EAN 13
8432336101106 8432336101205 8432336101304 8432336101403 8432336101502 8432336101601 8432336101700
*Plus 2cm separated from the wall
Static Storage Heaters
7