Technical information

48
G-Reyder, energy manager, 3 outputs, single or three phases
Appropriate for single or three phases installations.
Cascadocyclique® load-shedding on 3 outputs, not prioritaries in single phase and on 1 output per phase in three-phase layouts.
Suitable for:
- Conventional –or pilot wire– thermal radiators, panel heaters or direct heating in general.
Accessories
MODEL VOLTAGE CONTACTS POWER
G-Reyder 230V~ 3 x 15A Equivalent to 100A measured
RG - CPL, energy manager suitable for mains borne signaling,
single and three phases
Power manager appropriate for heaters monitored with mains borne signaling control units, CPL, with individual receptors. This
manager does not require receptors’ interconnection.
MODEL VOLTAGE OUTPUT POWER
RG-CPL 230V~ 2A Equivalent to 100A measured
Features:
- 230 V, 50 Hz power supply, ± 10%.
- Class II insulation.
- 2 inputs for programmers (clocks, programming control unit, etc.).
- 1 absence input (telephone remote control).
- Pilot wire-type heating selection input.
- 1 remote information connection input (output from the Electronic meter).
- Display of the state of the dialogue with the electronic meter.
- Circuit-breaker caliber selector knob (5 A to 90 A).
- Current measure with external transformer TC-100 (as standard a single phase TC -100 is supplied, additionally it can be supplied a kit
with two TC-100 for three phase installations
- Display of either set-point or room temperature.
Suitable for:
- Thermal inertia radiators with eco fl uid, RKHi and RKL ranges.
- Thermal inertia Eco-Seco radiators, RKSHi and RKSL ranges.
Features:
- It manages from 1 to 8 outputs in both one-phase or three-phase installations.
- Input 4 VA.
- Caliber from 15A to 90A.
48