Datasheet

ManualsBrandsELNEC ManualsChip ProgrammersSmartProg2 SmartProg2

SmartProg2

Universal, ISP capable programmer

Short description:

26437 supported devices from 205 manufacturers by

2.75 version of SW (21. Dec. 2010)

small, fast and powerful universal programmer

DIL40 ZIF socket, devices in DIL package up to 40 pins

are supported without adapters

connector for in-circuit programming (ISP)

connection to PC: USB port

USB 2.0 full speed and USB 1.1 compatible

comfortable and easy to use control program, work

with all versions of MS Windows from Windows 98 to

Window 7 64-bit

free SW update, download from Internet

power supply, cable and software included

approved by CE laboratory to meet CE requirements

made in Slovakia

warranty - 3 years

Available accessories:

Programming Adapters (Socket Converters)

Diagnostic POD for ISP connector

Features

GENERAL

SmartProg2 is the next member of new generation MS Windows (from Windows 98 to Window 7 64-bit) based

ELNEC universal programmers. Programmer is built to meet the demands of development labs and field

engineers for universal, but portable programmer.

SmartProg2 is a small, fast and powerful programmer of all kinds of programmable devices. Using build-in

in-circuit serial programming (ISP) connector the programmer is able to program ISP capable chips in-circuit.

SmartProg2 isn't only a programmer, but also a static RAMs tester.

Provides very competitive price with excellent hardware design for reliable programming. Nice "value for

money" in this class.

Very fast programming due to high-speed FPGA driven hardware and USB 2.0 full speed port.

SmartProg2 interfaces with the IBM compatible PC, portable or desktop personal computers through USB

port, what is important for new, LPT-port-less computers (notebooks for example).

HARDWARE

40 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of socket.

Advanced pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or

ground bounce for all supported devices. Pin drivers operate down to 1.8V so you'll be ready to program the

full range of today's advanced low-voltage devices.

The programmer performs device insertion test (wrong device position in socket) and contact check (poor

contact pin-to-socket) before it programs each device. These capabilities, supported by signature-byte

check help prevent chip damage due to operator error.

SmartProg2 programmer performs programming verification at the marginal level of supply voltage, which,

obviously, improves programming yield, and guarantees long data retention.

Various programming adapters are available to handle device in PLCC, SOIC, SSOP, TSOP, TSSOP, TQFP,

QFN (MLF) and other packages.

SOFTWARE

Programmer is driven by an easy-to-use control program with pull-down menus, hot keys and on-line help.

Selecting of device is performed by its class, by manufacturer or simply by typing a fragment of vendor name

Summary of content (5 pages)

PAGE 1
SmartProg2 Universal, ISP capable programmer Short description: 26437 supported devices from 205 manufacturers by 2.75 version of SW (21. Dec. 2010) small, fast and powerful universal programmer DIL40 ZIF socket, devices in DIL package up to 40 pins are supported without adapters connector for in-circuit programming (ISP) connection to PC: USB port USB 2.0 full speed and USB 1.
PAGE 2
and/or part number. Standard device-related commands (read, blank check, program, verify, erase) are enhanced by some test functions (insertion test, signature-byte check), and some special functions (autoincrement). All known data formats are supported. Automatic file format detection and conversion during loading of file.
PAGE 3
10-pin male type with missinsertion lock 5 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V up to 5V to handle all (low-voltage including) devices. 1x VCCP voltage (range 2V..7V/100mA) (*1) and 1x VPP voltage (range 2V..25V/50mA) programmed chip voltage (VCCP) with both source/sink capability and voltage sense (*1) - the programmer is not capable to supply a target system from VCCP pin.
PAGE 4
Algorithms: only manufacturer approved or certified algorithms are used. Custom algorithms are available at additional cost. Algorithm updates: software updates are available approx. every 2 weeks, free of charge. Main features: revision history, session logging, on-line help, device and algorithm information.
PAGE 5
Additional services Keep Current - ELNEC sends to user the latest version of programmer software and updated user documentation (Keep-Current package) AlgOR (Algorithms On Request) - add new supported devices on customer request Programmer price also includes free technical support (WebForm/e-mail based) free life-time software update via Internet The information in this document is subject to change without notice.