Datasheet

ManualsBrandsELNEC ManualsChip ProgrammersBeeProg2C

Page 1BeeProg2C | Universal device programmer | Elnec

17.04.2015 16:54:45http://www.elnec.com/products/universal-programmers/beeprog2c/

BeeProg2C

(ord.no. 60-0059)

Extremely fast universal USB interfaced programmer.

Cost effective version of BeeProg2 programmer (differences see below). If you need to program some of the mentioned devices, see BeeProg2 programmer.

Short description:

86534 supported devices from 308 manufacturers by 3.13 version of SW (26. Mar. 2015)

extremely fast programming, one of the fastest programmers in this category.

Sustainable programming speed greater than 5 MBytes per second.

Programs 2 GB eMMC NAND Flash in less than 365 sec.

48-pins powerful pindrivers, no adapter required for any DIL devices

ISP connector for in-circuit programming

connection to PC: USB 2.0 (up to 480 Mbit/s, high speed/full speed) and 1.1 compatible

interface

after upgrade to BeeProg2, also high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface is

available

comfortable and easy to use control program, works with all versions of MS Windows from

Windows XP to Windows 8.1 (32-bit and 64-bit*)

unique quick reaction to customer's needs - software update can be ready within a day from

request by OnDemand software

Multiprogramming possible by attaching more programmers to one PC

made in Slovakia

warranty - 3 years

approved by CE laboratory to meet CE requirements

Optional accessories:

Programming Adapters (Socket Converters)

Accessories: Calibration test POD, Vacuum pen, ...

Features

GENERAL

BeeProg2C is USB-compatible, MS Windows (from Windows 2000 to Windows 8 32-bit and 64-bit) based ELNEC universal programmers, built to meet the

strong demand of the small manufacturing and developers community for the fast and reliable universal programmer.

BeeProg2C programmer have hardware identical with the BeeProg2 programmer, the differences are only in software. BeeProg2C have next limitations

against BeeProg2:

unsupported obsolete bipolar chips (PROMs and PLDs)

unsupported obsolete EPROMs with programming voltage 21V and above

unsupported obsolete 2708 EPROMs

unsupported obsolete microcontrollers MCS48 series

unsupported obsolete microcontrollers 8751/8752 with programming voltage 21V and above

LPT port connection usage is disabled in software

BeeProg2C programmer can be any time upgraded to BeeProg2 using BeeProg2C to BeeProg2 upgrade kit

Supports all kinds of types and silicon technologies of today and tomorrow programmable devices without family-specific module. You have freedom

to choose the optimal device for your design. Using built-in in-circuit serial programming (ISP) connector, the programmer is able to program ISP

capable chips in circuit.

BeeProg2C isn't only a programmer, but also a tester of TTL/CMOS logic ICs and memories. Furthermore, it allows generation of user-definable test

pattern sequences.

Provides very competitive price coupled with excellent hardware design for reliable programming.

Extremely fast programming due to high-speed FPGA driven hardware and execution of time-critical routines inside of the programmer. As a result,

when used in manually-operated production, this one-socket-programmer in most cases waits for an operator.

BeeProg2C interfaces with any IBM PC compatible personal computers, running MS Windows OS, through USB (2.0 HigSpeed) port. After upgrade to

BeeProg2 can be also used through parallel (printer) port.

HARDWARE

FPGA based totally reconfigurable 48 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of socket. Advanced

pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or ground bounce for all supported devices. Improved pin

drivers drivers operate down to 1.8V so you'll be ready to program the full range of today's advanced low-voltage devices.

The programmer performs device insertion test (wrong or backward position) and contact check (poor contact pin-to-socket) before it programs each

device. These capabilities, supported by overcurrent protection and signature-byte check help prevent chip damage due to operator error.

The selftest capability allow to run diagnostic part of software to thoroughly check the health of the programmer.

Built-in protection circuits eliminate damage of programmer and/or programmed device due to environment or operator failure. All the inputs of the

BeeProg2C programmer, including the ZIF socket, connection to PC and power supply input, are protected against ESD up to 15kV.

BeeProg2C programmer performs programming verification at the marginal level of supply voltage, which, obviously, improves programming yield,

and guarantees long data retention.

When programming specification require, the (BeeProg2C) programmer performs programming verification at the marginal level of supply voltage,

which, obviously, improves programming yield, and guarantees long data retention.

Various programming adapters are available to handle device in PLCC, JLCC, SOIC, SDIP, SOP, PSOP, SSOP, TSOP, TSOPII, TSSOP, QFP, PQFP, TQFP,

VQFP, QFN (MLF), SON, BGA, EBGA, FBGA, VFBGA, UBGA, FTBGA, LAP, CSP, SCSP, LQFP, MQFP, HVQFN, QLP, QIP and other packages.

SOFTWARE

Programmer is driven by an easy-to-use control program with pull-down menu, hot keys and on-line help. Selecting of device is performed by its class,

by manufacturer or simply by typing a fragment of vendor name and/or part number.

Standard device-related commands (read, blank check, program, verify, erase) are boosted by some test functions (insertion test, signature-byte

check), and some

special functions (autoincrement, production mode - start immediately after insertion of chip into socket).

All known data formats are supported. Automatic file format detection and conversion during loading of file.

The rich-featured auto-increment function enables one to assign individual serial numbers to each programmed device - or simply increments a serial

number, or the function enables one to read serial numbers or any programmed device identification signatures from a file.

The software also provide a many information about programmed device. As a special, the drawings of all available packages are provided. The

software provide also explanation of chip labelling (the meaning of prefixes and suffixes at the chips) for each supported chip.

The software provide a full information for ISP implementation: Description of ISP connector pins for currently selected chip, recommended target design

around in-circuit programmed chip and other necessary information.

The remote control feature allows to be PG4UW software flow controlled by other application – either using .BAT file commands or using DLL file. DLL

file, examples (C/PAS/VBASIC/.NET) and manual are part of standard software delivery.

Summary of content (5 pages)

PAGE 1
BeeProg2C | Universal device programmer | Elnec Page 1 BeeProg2C (ord.no. 60-0059) Extremely fast universal USB interfaced programmer. Cost effective version of BeeProg2 programmer (differences see below). If you need to program some of the mentioned devices, see BeeProg2 programmer. Short description: 86534 supported devices from 308 manufacturers by 3.13 version of SW (26. Mar. 2015) extremely fast programming, one of the fastest programmers in this category.
PAGE 2
BeeProg2C | Universal device programmer | Elnec Page 2 Jam files of JEDEC standard JESD-71 are interpreted by Jam Player. Jam files are generated by design software which is provided by manufacturer of respective programmable device. Chips are programmed in-ZIF or through ISP connector (IEEE 1149.1 Joint Test Action Group (JTAG) interface). VME files are interpreted by VME Player. VME file is a compressed binary variation of SVF file and contains high-level IEEE 1149.1 bus operations.
PAGE 3
BeeProg2C | Universal device programmer | Elnec Page 3 Serial Flash: standard SPI, high performance Dual I/O SPI and Quad I/O SPI (25Bxxx, 25Dxxx, 25Exxx, 25Fxxx, 25Lxxx, 25Mxxx, 25Pxxx, 25Qxxx, 25Sxxx, 25Txxx, 25Uxxx, 25Vxxx, 25Wxxx, 25Xxxx, 26Vxxx, 45PExx, MX66Lxxx, S70FLxxx), DataFlash (AT45Dxxx, AT26Dxxx) parallel NOR Flash: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series, Samsung's K8Fxxxx, K8Cxxxx, K8Sxxxx, K8Pxxxx series, ...
PAGE 4
BeeProg2C | Universal device programmer | Elnec Page 4 Microcontrollers Samsung: ICPZBSxxx series Microcontrollers Scenix (Ubicom): SXxxx series Microcontrollers Silicon Laboratories(Energy Micro): EFM32Gxx, EFM32GGxx, EFM32LGxx, EFM32TGxx, EFM32WGxx series Microcontrollers STM (ex SGS-Thomson): ST6xx, ST7xx, ST10xx, STR7xx, STR9xx, STM32F/L/W, STM8A/S/L series, SPC5 (Power Architecture) Microcontrollers Silicon Laboratories(Cygnal): C8051 series Microcontrollers & Programmable System Memory STMicroelectr
PAGE 5
BeeProg2C | Universal device programmer | Elnec Page 5 fill/copy, move, byte swap, word/dword split checksum (byte, word) print File load/save no download time because programmer is PC controlled automatic file type identification/recognition Supported file formats unformatted (raw) binary HEX: Intel, Intel EXT, Motorola S-record, MOS, Exormax, Tektronix, ASCII-SPACE-HEX,, ASCII HEX Altera POF, JEDEC (ver. 3.0.A), eg. from ABEL, CUPL, PALASM, TANGO PLD, OrCAD PLD, PLD Designer ISDATA, etc.