Installation Guide Owner manual

DC Whistle Installation Guide Installation
MAN-DCWHIIG (Ver. 1.101)
www.elmomc.com
18
The following connectors are used for wiring the DC Whistle:
Type Function
Main Power VP+, PR, PE
Motor Power PE, M1, M2, M3
Aux. Power VL+, PR
Connectors Location
Table 1: Connectors on the “Power Connectors side” of the DC Whistle
Type Function
Main Feedback Feedback
I/O I/O
Auxiliary Feedback Auxiliary Feedback
Connectors Location
Table 2: Connectors on the “Feedback and I/O side” of the DC Whistle
Type Function
CAN CAN IN
CAN CAN OUT
RS-232 RS-232
Connectors Location
Table 3: Connectors on the “Communication side” of the DC Whistle
Motor Power
Main Power
Aux. Power
CAN IN
CAN OUT