User Manual

Solo Whistle Installation Guide Technical Specifications

MAN-SOLWHIIG (Ver. 1.503)

www.elmomc.com

4.7.2.6. Potentiometer

Feature Details

Potentiometer Format Single-ended

Operating Voltage Range 0 to 5 V supplied by the Solo Whistle

Potentiometer Resistance 100 Ω to 1 kΩ … above this range, linearity is

affected detrimentally

Input Resistance 100 kΩ

Resolution 14 bit

4.7.3. Auxiliary Feedback Port (output mode YA[4]= 4)

Feature Details

Encoder output and main buffered

output

• A, B, Index

• Differential outputs

• Quadrature

Interface RS-422

Output current capability

 Driving differential loads of 200 Ω on

INDEX/INDEX-, CHB/CHB- and CHA/CHA- pairs

Available as options

• Simultaneous buffered outputs of main-

incremental encoder input

• Simultaneous emulated encoder outputs of

analog encoder input

• Simultaneous emulated encoder outputs of

resolver input

Maximum frequency f

MAX

: 5 MHz pulses/output

Index (marker) Length of pulse is one quadrature (one quarter of

an encoder cycle) and synchronized to A&B