User Manual

Solo Whistle Installation Guide Installation
MAN-SOLWHIIG (Ver. 1.503)
www.elmomc.com
21
3.5. Main Power – J1
Pin (J1) Signal Function
1 VL+ Auxiliary supply input
2 PR Auxiliary supply input return
3 VP+ Pos. power input
4 VP+ Pos. power input
5 PR Power return
6 PR Power return
7 PE Protective earth
8 N/C Not connected
9 N/C Not connected
Pin Positions
Note: When connecting several drives to several motors, all should be wired in the same
motor phases and feedback sequences. This will enable the same SimplIQ program to run on all
drives.