Installation Guide Manual

Trombone Installation Guide Technical Specifications
MAN-TROIG (Ver. 1.403)
www.elmomc.com
70
4.3. Power Ratings
Feature Units 12/400 16/400 R17/400 R22/400 8/800 12/800 R11/800 R16/800
Minimum supply
voltage
VDC S suffix in P/N*: 50
No S suffix in P/N: 100
S suffix in P/N*: 95+
Nominal supply
voltage
VDC 325 560 for 400 VAC
680 for 480 VAC
Maximum supply
voltage
VDC 400 780
Maximum continuous
power output
W Up to 10 kW of continuous qualitative power
Efficiency at rated
power (at nominal
conditions)
% > 98
Auxiliary supply
voltage option
VDC 18 V to 30 V
Only for Control Supply S suffix Model
Auxiliary power
supply
VA ≤5 VA without external loading
≤8 VA with full external loading
Continuous current
limit (Ic) Amplitude
sinusoidal/DC
trapezoidal
commutation
A 12 16 17 22 8 12 11 16
Sinusoidal continuous
RMS current limit (Ic)
A 8.5 11.3 12 15.5 5.7 8.5 7.8 11.3
Peak current limit A 2 x Ic No peak 2 x Ic No peak
Weight g (oz) 250 g (8.8 oz)
Dimensions mm
(in)
111 x 76 x 30 (4.33" x 2.95" x 1.18")
Digital in/Digital out/
Analog in
6/4/1
Mounting method PCB Mounted
*See page 17 for details on the part number. The S suffix appears in models where there is a
24 V control supply. If there is no S suffix, the control power supply operates from the main
power.
Note on current ratings: The current ratings of the Trombone are given in units of DC
amperes (ratings that are used for trapezoidal commutation or DC motors). The RMS
(sinusoidal commutation) value is the DC value divided by 1.41.