Installation Guide Manual

Revision History
Version Details
1.0 Initial release
1.1 Significant changes to the Appendix (Chapter 4)
1.2 Upgraded Trombone version to include new absolute
encoder settings and STO.
1.3 Sections 4.3 and 4.3.1: Auxiliary Supply Voltage range: 18
V to 30 V
1.4 September 2012 Change the overvoltage in 800 V mode, Pin layout, UL
recognition, and further optional versions added
“Metronome” was replaced by the “Composer” software.
1.401 February 2013 Added a caution and recommendation on the type of
cleaning solution to use for the Elmo unit.
1.402 June 2014 Document update
1.403 July 2014 Basic format changes