User Manual

DC Trombone Installation Guide Installation

MAN-DCTROIG (Ver. 1.601)

www.elmomc.com

3.8. I/O Cables

The DC Trombone has two I/O ports, P1 and P2. P1 is a general I/O which can be used to

connect 6 digital inputs and 4 digital outputs. P2 has 1 analog input port, and buffered encoder

signals that are derived from the main feedback:

I/O P1 Port P2 Port

Digital Input 6 -

Digital Output 4 -

Analog Input - 1

3.8.1. General I/O Port (P1)

Port P1 has a 15-pin high density D-Sub plug. When assembling this I/O cable, follow the

instructions in Section 3.7 (Feedback and Control Cable Assemblies) using a 15-pin high density

metal case D-Sub female connector (socket).

The I/Os for Port P1 detailed below; Digital Output (as Source Configuration) & Input (as Sink

Configuration) are defaults, although several options are available (upon request).

Note: The digital input interface is suitable for both TTL-level (5V) and PLC-level (24V).