Owner's manual

Cymbal Installation Guide Installation
MAN-CYMIG (Ver. 1.3)
28
3.5.3.2. J4Hall’sSignalPort
PortJ4isa15‐pinD‐Subfemaleconnector.Whenassemblingthiscable,followtheinstructions
inSection 3.5.2Control,I/OsandHallsCableAssembliesusinga15‐pinametalcaseD‐Sub
maleconnector(plug).
Pin

Signal Function Description PinPosition
1 HALL+15V +15VHallsupply
voltage:15V±10%
at30mA
+15Vsupplyvoltage
forHallsensors.
Outputcurrent:
maximumof30mA.
15‐PinFemale
2 HALL+5V +5VHallsupply
voltage:5V±10%at
30mA
+5Vsupplyvoltage
forHallsensors.
Outputcurrent:
maximumof30mA.
3 HARET Hallsupplyvoltage
return
Returnusedonlyfor
Hallsupply.
4 HARET Hallsupplyvoltage
return
Returnusedonlyfor
Hallsupply.
5 HA HallAinput
Logiclevels:TTL
Maximuminput
voltage:15VDC.
6 HB HallBinput
Logiclevels:TTL
Maximuminput
voltage:15VDC.
7 HC HallCinput
Logiclevels:TTL
Maximuminput
voltage:15VDC.
8 N.C.
9 N.C.
10 N.C.
11 N.C.
12 N.C.
13 N.C.
14 N.C.
15 N.C.
J4Female
Table9:J4HallsCable‐PinAssignments
www.elmomc.com