Manual

Gold DC Trombone Cable Kit (EtherCAT and CAN)
MAN-G-DCTRO-CBLKIT (Ver. 1.100)
www.elmomc.com
13
Chapter 6:
24 VDC Auxiliary Supply
The 24 VDC auxiliary supply is a single twisted-pair 24-AWG double-shielded cable. It is
connected to the auxiliary power supply connector.
The cable is open on the end side so that it can be connected to the auxiliary power supply.
The general pinout of the 24 VDC auxiliary supply is as follows:
Pin
No.
Signal Color Twisted &
Shielded Wire
VL+ +24VDC Red
Pair
VL- 24VDC_RET Black
2-Pin Pluggable 5.08 mm Phoenix High Current
2-Pin Phoenix Plug-in
Connector
Note: The specific functionality of each pin is described fully in the Gold DC Trombone
Installation Guide.
Figure 4: 24 VDC Auxiliary Supply Cable