Owner's manual

Gold DC Bell Installation Guide

MAN-G-DCBELIG-EC (Ver. 1.200)

||Port A(J1)|www.elmomc.com

Table of Contents

6.6. Port A(J1)

See Section 10.3 in the in the MAN-G-Panel Mounted Drives Hardware manual for full details.

Incremental Encoder Absolute Serial Encoder

Pin(J1) Signal Function Signal Function

1 +5V Encoder +5V supply +5V Encoder +5V supply

2 COMRET Common Return COMRET Common Return

3 PortA_ENC_A+ Channel A + ABS_CLK+ Absolute encoder clock+

4 PortA_ENC_A- Channel A - ABS_CLK- Absolute encoder clock-

5 PortA_ENC_B+ Channel B+ ABS_DATA+ Absolute encoder data+

6 PortA_ENC_B- Channel B - ABS_DATA- Absolute encoder data -

7 PortA_ENC_INDEX+ Index+ Reserved Reserved

8 PortA_ENC_INDEX- Index - Reserved Reserved

9 HA Hall sensor A HA Hall sensor A

10 HB Hall sensor B HB Hall sensor B

11 HC Hall sensor C HC Hall sensor C

COMRET Common Return COMRET Common Return

Pin Positions Cable Connector

12-Pin 2.54 mm Pitch Molex

12-Pin Molex Plug

This cable is included in the

cable kit described in

Section 3.1.1.

Table 7: Port A Pin Assignments