Owner's manual

Gold DC Bell Installation Guide
MAN-G-DCBELIG-EC (Ver. 1.200)
||Drive Status Indicator|www.elmomc.com
31
Table of Contents
6.4. Drive Status Indicator
Figure 16 shows the position of the red/green dual LED, which is used for immediate indication of
the Initiation and Working states. For details refer to Chapter 7 Drive Status Indicator, in the
MAN-G-Panel Mounted Drives Hardware manual.
Figure 16: Drive Status Indicator - EtherCAT
Figure 17: Drive Status Indicator - CAN
The red/green dual LED is used for immediate indication of the following states:
• Initiation state: In this state the LED indicates whether the drive is in the boot state
(blinking red) or in the operational state (steady red).
• Working state: In this state the LED indicates whether the drive is in an amplifier failure
state (red) or is ready to enable the motor (green).