User Manual

Gold Bell Installation Guide Technical Specifications

MAN-G-BELIG (Ver. 1.004)

www.elmomc.com

5.4.3. Port C Feedback Output

Feature Details

Emulated output

• A, B, Index

• Differential

Interface RS-422

Output current capability Maximum output current: I

(max) = 2 mA

High level output voltage: V

> 3.0 V

Minimum output current: I

= 2 mA

Low level output voltage: V

< 0.4 V

Available as options

• Emulated encoder output of any sensor

on Port A or Port B

• Daisy chain Port A or Port B

• Emulated encoder output of internal

variables

• Emulated encoder outputs of the

tachometer

• Emulated encoder outputs of the

potentiometer

Maximum frequency f

MAX

: 8 MHz pulses/output

Edge separation between A & B Programmable number of clocks to allow

adequate noise filtering at remote receiver

of emulated encoder signals (default 2 MHz)

Index (marker) Length of pulse is one quadrature (one

quarter of an encoder cycle) and

synchronized to A&B