User Manual

Gold Bell Installation Guide Installation
MAN-G-BELIG (Ver. 1.004)
www.elmomc.com
56
4.10. User I/Os
The Gold Bell has six programmable digital inputs (J1), four digital outputs (J1) and one analog
input (J2).
4.10.1. Digital Inputs (J1)
Each of the pins below can function as an independent input. The inputs conform to the TTL
level.
Pin (J1) Signal Function
3 INRET1-6 Programmable inputs 1 - 6 return
4 IN1 Programmable digital input 1
(event capture, home, general purpose, RLS, FLS, INH, PWM & dir
input, pulse & dir input)
5 IN2 Programmable digital input 2
(event capture, home, general purpose, RLS, FLS, INH, PWM & dir
input, pulse & dir input)
6 IN3 Programmable digital input 3
(event capture, home, general purpose, RLS, FLS, INH, PWM & dir
input, pulse & dir input)
7 IN4 Programmable digital input 4
(event capture, home, general purpose, RLS, FLS, INH, PWM & dir
input, pulse & dir input)
8 IN5 Programmable digital input 5
(event capture, home, general purpose, RLS, FLS, INH, PWM & dir
input, pulse & dir input)
9 IN6 Programmable digital input 6
(event capture, home, general purpose, RLS, FLS, INH, PWM & dir
input, pulse & dir input)
Table 17: Digital Input Pin Assignments
See Figure 23 for the TTL connection.