User Manual

Gold Bassoon Installation Guide
MAN-G-BASIG-EC (Ver. 1.002)
|Fan Connector (Optional)|www.elmomc.com
54
Table of Contents
6.10 Fan Connector (Optional)
Notes:
• Only available for G-BASXX/YYYXXXX1
• The Smart FAN algorithm starts working when the internal heat-sink temperature reaches 60°C.
• The optional Fan may be required when the drive is used in tough environmental conditions
leading to extreme temperatures causing the drive to exceed its thermal limits. In
circumstances such as the one described here, installing a fan may be required to overcome the
situation. The basis for the fan is already available for easy installation. Installation instructions
are available together with the Fan kit.
• The Gold Bassoon servo drive with the suffix ‘1’ has a built-in fan and the drive with a blank or
‘2’ suffix can be integrated on the field with a fan kit.
• The optional Fan kit (Part No. PHA-DCTRO03) is available and can be purchased separately.
Pin Function Cable
+ Fan Positive Fan cable
- Fan Return Fan cable
Pin Positions
2-Pin Pluggable 3.81 mm Phoenix Connector
Table 9: Fan Connector Pin Assignments