Manual
Table Of Contents
- Chapter 1: This Installation Guide
- Chapter 2: Safety Information
- Chapter 3: Product Description
- Chapter 4: Technical Information
- Chapter 5: Installation
- Chapter 6: Wiring
- 6.1 Basic Recommendations
- 6.2 Motor Power Connector Pinouts
- 6.3 Main Power, Auxiliary Power
- 6.4 Port A
- 6.5 Port B
- 6.6 Port C, Analog Input, and STO
- 6.7 Digital Inputs and Outputs
- 6.8 USB
- 6.9 Drive Status Indicator
- 6.10 EtherCAT Communications Version
- 6.11 CAN Communications Version
- 6.12 Powering Up
- 6.13 Initializing the System
- Chapter 7: Gold Tiger Dimensions
Gold Tiger Installation Guide
MAN-G-TIGIG (Ver. 1.000)
||Drive Status Indicator|www.elmomc.com
57
Table of Contents
6.9 Drive Status Indicator
The Gold Tiger is equipped with several light-emitting diode (LED) indicators.
The red/green dual LED is used for immediate indication of the following states:
• Initiation state: In this state the LED indicates whether the drive is in the boot state (blinking
red) or in the operational state (steady red).
• Working state: In this state the LED indicates whether the drive is in an amplifier failure state
(red) or is ready to enable the motor (green).
Figure 39: Gold Tiger Drive Status Indicator