Manual
Table Of Contents
- Chapter 1: This Installation Guide
- Chapter 2: Safety Information
- Chapter 3: Product Description
- Chapter 4: Technical Information
- Chapter 5: Installation
- Chapter 6: Wiring
- 6.1 Basic Recommendations
- 6.2 Motor Power Connector Pinouts
- 6.3 Main Power, Auxiliary Power
- 6.4 Port A
- 6.5 Port B
- 6.6 Port C, Analog Input, and STO
- 6.7 Digital Inputs and Outputs
- 6.8 USB
- 6.9 Drive Status Indicator
- 6.10 EtherCAT Communications Version
- 6.11 CAN Communications Version
- 6.12 Powering Up
- 6.13 Initializing the System
- Chapter 7: Gold Tiger Dimensions
Gold Tiger Installation Guide
MAN-G-TIGIG (Ver. 1.000)
||Port A|www.elmomc.com
37
Table of Contents
6.4.1 Incremental Encoder
The following figure describes the connections at Port A for the Incremental encoder.
Figure 19: Port A D-Type Incremental Encoder Input – Recommended Connection Diagram
6.4.2 Hall Sensor
The following figure describes the connections at Port A for the Hall Sensor.
Figure 20: Hall Sensor Connection Diagram