Manual
Table Of Contents
- Chapter 1: This Installation Guide
- Chapter 2: Safety Information
- Chapter 3: Product Description
- Chapter 4: Technical Information
- Chapter 5: Installation
- Chapter 6: Wiring
- 6.1 Basic Recommendations
- 6.2 Motor Power Connector Pinouts
- 6.3 Main Power, Auxiliary Power
- 6.4 Port A
- 6.5 Port B
- 6.6 Port C, Analog Input, and STO
- 6.7 Digital Inputs and Outputs
- 6.8 USB
- 6.9 Drive Status Indicator
- 6.10 EtherCAT Communications Version
- 6.11 CAN Communications Version
- 6.12 Powering Up
- 6.13 Initializing the System
- Chapter 7: Gold Tiger Dimensions
Gold Tiger Installation Guide
MAN-G-TIGIG (Ver. 1.000)
||Main Power, Auxiliary Power|www.elmomc.com
32
Table of Contents
6.3.1.1.b Single-Phase Direct-to-Mains Connection Topology
Figure 15: Non-Isolated Single-Phase Connection Topology
The Power Supply is connected directly to the mains AC line.
Warnings:
• Do not connect VN- to PE. In a direct-to-mains connection the VN- must not
be connected to the PE, as this will cause irreparable damage to the system.
• Take care and note that in a direct-to-mains connection the Neutral point is
not the most negative voltage level. It is the mid-point level of the rectified
DC bus.