Manual
Table Of Contents
- Chapter 1: This Installation Guide
- Chapter 2: Safety Information
- Chapter 3: Product Description
- Chapter 4: Technical Information
- Chapter 5: Installation
- Chapter 6: Wiring
- 6.1 Basic Recommendations
- 6.2 Motor Power Connector Pinouts
- 6.3 Main Power, Auxiliary Power
- 6.4 Port A
- 6.5 Port B
- 6.6 Port C, Analog Input, and STO
- 6.7 Digital Inputs and Outputs
- 6.8 USB
- 6.9 Drive Status Indicator
- 6.10 EtherCAT Communications Version
- 6.11 CAN Communications Version
- 6.12 Powering Up
- 6.13 Initializing the System
- Chapter 7: Gold Tiger Dimensions
|Warnings|www.elmomc.com
Table of Contents
Notice
This guide is delivered subject to the following conditions and restrictions:
• This guide contains proprietary information belonging to Elmo Motion Control Ltd. Such
information is supplied solely for the purpose of assisting users of the Gold Tiger servo drive
in its installation.
• The text and graphics included in this manual are for the purpose of illustration and reference
only. The specifications on which they are based are subject to change without notice.
• Information in this document is subject to change without notice.
Document no. MAN-G-TIGIG (Ver. 1.000)
Copyright 2014
Elmo Motion Control Ltd.
All rights reserved.
Catalog Number