Owner's manual

Gold Solo Hornet Installation Guide (EtherCAT and CAN) Technical Specifications
MAN-G-SOLHORIG-EC (Ver. 1.009)
|www.elmomc.com
82
Table of Contents
5.4.3. Port C Feedback Output
Feature Details
Emulated output
• A, B, Index
• Differential
Interface
• RS-422
Output current capability Maximum output current: I
OH
(max) = 2 mA
High level output voltage: V
OH
> 3.0 V
Minimum output current: I
OL
= 2 mA
Low level output voltage: V
OL
< 0.4 V
Available as options
• Emulated encoder output of any sensor on
Port A or Port B
• Daisy chain Port A or Port B
• Emulated encoder output of internal
variables
• Emulated encoder outputs of the tachometer
• Emulated encoder outputs of the
potentiometer
Maximum frequency f
MAX
: 8 MHz pulses/output
Edge separation between A & B Programmable number of clocks to allow adequate
noise filtering at remote receiver of emulated
encoder signals (default 2 MHz)
Index (marker) Length of pulse is one quadrature (one quarter of
an encoder cycle) and synchronized to A&B