Owner's manual

Gold Solo Hornet Installation Guide (EtherCAT and CAN) Installation
MAN-G-SOLHORIG-EC (Ver. 1.009)
|www.elmomc.com
69
Table of Contents
4.11.4.2. Ethernet Communication (J3)
Notes:
• The EtherCAT IN port can be configured as an Ethernet port for TCP/IP – see the EtherCAT
Manual.
• It is recommended to use shielded CAT5e (or higher) cable. Category 5e cable is a high
signal integrity cable with four twisted pairs.
The Gold Solo Hornet Ethernet communication pins are part of the J3 connector, see Section
4.3.2.3 for more details.
Pin (J3) Signal Function
8
TX+
Ethernet In Transmit
9 TX- Ethernet In Transmit Complement
11 RX+ Ethernet In Receive
12 RX- Ethernet In Receive Complement
13 COMRET Common Return
19 PE Protective Earth
Pin Positions
Table 21: Ethernet - Pin Assignments