User Manual

Gold Hornet Installation Guide (EtherCAT and CAN) Installation
MAN-G-HORIG-E (Ver. 1.007)
www.elmomc.com
70
4.12. Powering Up
After the Gold Hornet is connected to its device, it is ready to be powered up.
Caution:
Before applying power, ensure that the DC supply is within the specified range
and that the proper plus-minus connections are in order.
4.13. Initializing the System
After the Gold Hornet has been connected and mounted, the system must be set up and
initialized. This is accomplished using the EAS, Elmo’s Windows-based software application.
Install the application and then perform setup and initialization according to the directions in
the EAS User Manual.