Instruction Manual

Gold Hawk Installation Guide Product Description
MAN-G-HAKIG (Ver. 1.001)
www.elmomc.com
17
2.2.13. Built-In Protection
• Software error handling
• Abort (hard stops and soft stops)
• Status reporting
• Protection against:
 Shorts between motor power outputs
 Shorts between motor power outputs and power input/return
 Failure of internal power supplies
 Over-heating
• Continuous temperature measurement. Temperature can be read on the fly; a warning can
be initiated x degrees before temperature disable is activated.
 Over/Under voltage
 Loss of feedback
 Following error
 Current limits
2.2.14. Status Indication
• Output for a bi-color LED
2.2.15. Automatic Procedures
• Commutation alignment
• Phase sequencing
• Current loop offset adjustment
• Current loop gain tuning
• Current gain scheduling
• Velocity loop offset adjustment
• Velocity gain tuning
• Velocity gain scheduling
• Position gain tuning