User guide

Gold Eagle Installation Guide
MAN-G-EAGIG-EC (Ver. 1.000)
||Drive Status Indicator|www.elmomc.com
30
Table of Contents
9.8. Drive Status Indicator
Drive Status LED – EtherCAT
Drive Status LED – CAN
Figure 14: Drive Status LEDs
This red/green dual LED is used for immediate indication of the following states:
• Initiation state: In this state the LED indicates whether the drive is in the boot state (blinking
red) or in the operational state (steady red).
• Working state: In this state the LED indicates whether the drive is in an amplifier failure state
(red) or is ready to enable the motor (green).