Owner's manual

Panther Installation Guide
MAN-PANIG (Ver. 1.302)
www.elmomc.com
12
Chapter 2:
Product Description
This installation guide describes the Panther servo drive and the steps for its wiring, installation
and power-up. Following these guidelines ensures optimal performance of the drive and the
system to which it is connected.
2.1.
ExtrIQ
Product Family
Elmo Motion Control’s ExtrIQ product family is a set of durable motion control products for
applications operating under extreme environmental conditions. The products are capable of
Feature Operation Conditions Range
Ambient
Temperature
Range
Non-operating conditions -50 °C to +100 °C (-58 °F to 212 °F)
Operating conditions -40 °C to +70 °C (-40 °F to 160 °F)
Temperature
Shock
Non-operating conditions -40 °C to +70 °C (-40 °F to 160 °F) within 3
min
Altitude
Non-operating conditions Unlimited
Operating conditions -400 m to 12,000 m (-1312 to 39370 feet)
Relative
Humidity
Non-operating conditions Up to 95% relative humidity non-condensing
at 35 °C (95 °F)
Operating conditions Up to 95% relative humidity non-condensing
at 25 °C (77 °F), up to 90% relative humidity
non-condensing at 42 °C (108 °F)
Vibration
Operating conditions 20 Hz to 2000 Hz, 14.6 g
Mechanical
Shock
Non-operating conditions ±40 g; Half sine, 11 msec
Operating conditions ±20 g; Half sine, 11 msec
ExtrIQ products have a high power density in the range of 50 W to 65 kW and current carrying
capacity of up to 140 A (280 A peak). All ExtrIQ servo drives have been tested using methods
and procedures specified in a variety of extended environmental conditions (EEC) standards,
including:
• MIL-STD-704 – Aircraft, Electric Power Characteristics
• MIL-STD-810 – Environmental Engineering Considerations and Laboratory Tests
• MIL-STD-1275 – Characteristics of 28 Volt DC Electrical Systems in Military Vehicles
• MIL-STD-461 – Requirements for the Control of Electromagnetic Interference
Characteristics of Subsystems and Equipment
• MIL-HDBK-217 – Reliability Prediction of Electronic Equipment