User Manual

Hawk Installation Guide Technical Specifications
MAN-HAWIG (Ver. 1.401)
www.elmomc.com
66
4.4. Power Ratings for 200 V models
Feature Units
10/200 17/200 20/200 R30/200
Minimum supply voltage VDC 46
Nominal supply voltage VDC 170
Maximum supply voltage VDC 195
Maximum auxiliary supply voltage VDC 195
Maximum continuous power output W 1600 2700 3200 4800
Efficiency at rated power (at nominal
conditions)
% > 97
Maximum output voltage 97% of DC bus voltage at f=22 kHz
Amplitude sinusoidal/DC continuous
current (Ic)
A 10 17 20 30
Sinusoidal continuous RMS current limit
(Ic)
A 7 12 14.1 21.2
Peak current limit A 2 x Ic No peak
Weight g (oz) 165 g (5.8 oz)
Dimensions mm (in) 80 x 61 x 24.5 (3.15" x 2.4" x 0.965")
Digital in/Digital out/ Analog in 6/4/1
Mounting method PCB mount
The following notes apply to all the above Power Rating models up to 100 V and 200 V.
Note on current ratings: The current ratings of the Hawk are given in units of DC amperes
(ratings that are used for trapezoidal commutation or DC motors). The RMS (sinusoidal
commutation) value is the DC value divided by 1.41.
4.5. Auxiliary Supply
Feature Details
Auxiliary power supply Isolated DC source only
Auxiliary supply input voltage 12 VDC to 195 VDC
Auxiliary supply input power 7 VA