Manual

Falcon Installation Guide
MAN-FALIG (Ver. 1.502)
www.elmomc.com
17
Chapter 3:
Installation
The Falcon must be installed in a suitable environment and properly connected to its voltage
supplies and the motor.
3.1. Before You Begin
3.1.1. Site Requirements
You can guarantee the safe operation of the Falcon by ensuring that it is installed in an
appropriate environment.
Feature Value
Ambient operating temperature -40 °C to +70 °C (-40 °F to 160 °F)
Maximum operating altitude 12,000 m (39370 feet)
Maximum non-condensing humidity 95%
Operating area atmosphere No flammable gases or vapors permitted in area
Models for extended environmental conditions are available.
Caution:
The Falcon dissipates its heat by natural convection. The maximum ambient
operating temperature of -40 °C to +70 °C (-40 °F to 160 °F) must not be
exceeded.
3.1.2. Hardware Requirements
The components that you will need to install your Falcon are:
Component Wire Described
in Section
Drawing
Main Power
Cable
VP+ - red
PR- black
3.4.2.2
Motor Cable M1 M2 M3-
white
3.4.2.1