Owner manual

Eagle Installation Guide Installation

MAN-EAGIG (Ver. 1.902)

www.elmomc.com

3.4.7. I/O Cables

The Eagle has one I/O port, J3. J3 is a general I/O, which can be used to connect 6 digital inputs, 2

digital outputs and 1 analog input.

I/O J3 Port

Digital Input 6

Digital Output 2

Analog Input 1

3.4.7.1. General I/O Port (J3)

Port J3 has a 15-pin high density D-Sub plug. When assembling this I/O cable, follow the

instructions in Section 3.4.3 0(Feedback Control and Communication Cable Assemblies) using a 15-

pin high density metal case D-Sub female connector (socket).

Pin Signal Function Pin Positions

1 ANLIN+ Analog input +

2 ANLIN- Analog input -

3 ANLRET Analog return

4 OUTRET2 Programmable output return 2

5 OUT2 Programmable output 2

6 IN6 Programmable input 6

7 INRET General input return

8 INRET General input return

9 OUTRET 1 Programmable output return 1

10 OUT1 Programmable output 1

11 IN1 Programmable input 1

12 IN2 Programmable input 2

13 IN3 Programmable input 3

14 IN4 Programmable input 4

15 IN5 Programmable input 5

Table 14: J3 I/O Cable – Pin Assignments

Male