Owner manual

Eagle Installation Guide Installation
MAN-EAGIG (Ver. 1.902)
www.elmomc.com
25
3.4.2. Connecting the Power Cables
The V bus and motor power screws are located in the lower part of the Eagle and include the
following:
Pin Function Cable Pin Positions
VP+ Pos. Power input Power
VN- Neg. Power input Power
PE Protective earth Power
3-Phase
Motor
Cable
DC
Motor
Cable
PE Protective earth Motor Motor
M1 Motor phase Motor N/C
M2 Motor phase Motor Motor
M3 Motor phase Motor Motor
Table 4: Connector for Main Power and Motor Cables
Note: When connecting several motors, all must be wired in an identical manner.
PE
PE
PE
PE