Owner manual

Eagle Installation Guide
MAN-EAGIG (Ver. 1.902)
www.elmomc.com
18
Chapter 3:
Installation
The Eagle must be installed in a suitable environment and properly connected to its voltage
supplies and the motor.
3.1. Before You Begin
3.1.1. Site Requirements
You can guarantee the safe operation of the Eagle by ensuring that it is installed in an appropriate
environment.
Feature Value
Ambient operating temperature -40 °C to +70 °C (-40 °F to 160 °F)
Maximum operating altitude 12,000 m (39370 feet)
Maximum non-condensing humidity 95%
Operating area atmosphere No flammable gases or vapors permitted in area
3.1.2. Hardware Requirements
The components that you will need to install your Eagle are:
Component Connector Described
in Section
Diagram
Main Power Cable VP+ VN- 3.4.2.2
Motor Cable M1 M2 M3 3.4.2.1