User Manual

Eagle HV Installation Guide Installation
MAN-EAG-HVIG (Ver. 1.502)
www.elmomc.com
20
3.3. Connectors
The Eagle HV has nine connectors.
3.3.1. Connector Types
The Eagle HV has the following types of connectors:
Type Function Port Connector Location
N/A N/A N
Barrel Connector +
M6 Spring Washer
+ M6 Nut
Power VP+, VN-
Motor M1, M2, M3
Barrel Connector +
M5 Flat Washer +
M5 Spring Washer
+ M5 screw
Ground PE, PE, PE, PE
Table 1: Power Connectors on the Eagle HV
Type Function Port Connector Location
15-Pin High-
Density Female
D-Sub Connector
Aux.
Feedback
FEEDBACK B
(Port B)
15-Pin Female
High-Density
D-Sub Connector
Main
Feedback
FEEDBACK A
(Port A)
26-Pin Male
High-Density
D-Sub Connector
Analog
Input and
General I/O
I/O
Table 2: Feedback and I/O Connectors on the Eagle HV
Note: Throughout this manual FEEDBACK A and FEEDBACK B refer to the connectors labeled
Port A and Port B on the Eagle HV and the cables connected to them.