Owner's manual

Cornet Installation Guide Installation
MAN-CORIG (Ver. 1.502)
www.elmomc.com
38
Below are the signals on the Auxiliary Feedback port when set up to run as a differential
auxiliary encoder input:
Port Pin Signal Function Pin Positions
B1
1
INDEX
Auxiliary Index high input
COR016A
15-Pin D-Sub Socket
B1 2 CHB Auxiliary Channel B high
input
B1 3 CHA Auxiliary Channel A high input
PWR 4 +5V Encoder supply voltage
PWR 5 SUPRET Encoder Supply return
B2 6 CHAO Buffered Channel A output
B2 7 CHBO Buffered Channel B output
B2
8
INDEXO
Buffered Index output
B1 9 INDEX- Auxiliary Index low
input
8
15
1
9
Port B1
Power
Port B2
15-Pin D-Sub Plug
on Cornet
B1
10
CHB-
Auxiliary Channel B low input
B1 11 CHA- Auxiliary Channel A low
input
PWR 12 SUPRET Supply return
B2 13 CHAO- Buffered Channel A complement output
B2 14 CHBO- Buffered Channel B complement output
B2 15 INDEXO- Buffered Index complement output
Table 7: Differential Auxiliary Encoder Input Option on FEEDBACK B –
Pin Assignments
FEEDBACK B on the front of the Cornet has a 15-pin D-Sub plug. Connect the Auxiliary
Feedback cable from the feedback device to FEEDBACK B using a 15-pin D-Sub socket with a
metal housing. When assembling the Auxiliary Feedback cable, follow the instructions in
Section 1.13.4 (Feedback and Control Cable Assemblies).