Owner's manual

Cornet Installation Guide Installation
MAN-CORIG (Ver. 1.502)
www.elmomc.com
20
1.12.2. Mounting on a DIN Rail
At the top rear of the Cornet, a horizontal groove lets you quickly and easily snap the drive
onto a DIN rail in your work area.
To mount the Cornet on a DIN rail:
2. Be sure that the vertical mounting strip (with the hole at the top) is pressed down fully and
does not protrude from the top of the instrument.
Figure 4: Mounting Strip Pressed Down
Tilt the Cornet back towards the top part of the DIN rail.
Figure 5: Attaching Top Part of Mounting Groove to a DIN Rail