- DBP SERIES USER MANUAL

47
DBP - Rev 6/93
Signals connector - J4 - cont.
Pin Function
Remarks
6 Input 5 or Index Input.
If a homing sequence is required, the Index Input
must be connected to Input 5.
7 Circuit common
8 Fast input 6
This fast response input can capture events with
a duration of less than 10µs. An event is defined
as an input voltage transition from low to high.
*
9 Fast input 7
Same function as Fast Input 6 (8).
10 Circuit common
11 +5V output
There are several +5V pins. The accumulative
external load should not exceed 200mA.
12 +5V output
There are several +5V pins. The accumulative
external load should not exceed 200mA.
13 Output 7
**
14 +5V output
There are several +5V pins. The accumulative
external load should not exceed 200mA.
15 Output 1
**
16 Output 2
**
17 Output 3
**
18 Circuit common
19 Output 4
**
20 Output 5
**
21 Output 6
**
22 Circuit common
23 Output 9
**
*
Vil<1V, Vih>2.4V, Maximum input voltage: +30VDC
**
Vol<0.4V, Voh>4V, Output level: 0-5V, max output current +5mA