Operating instructions

Page 2
6 Leighton Place
Mahwah, New Jersey 07430
P: 201•848•9818 F: 201•848•9819
CP-ITV4-S OPERATING INSTRUCTIONS
25’ CA-ITV-P25
Remote Control
Cable
Remote Panel
CP-ITV4-S
CP-ITV4S
Control Cable
Interconnect Cable Interconnect Cable Interconnect Cable
System with Daisy Chain Wirin
g
Video Switcher
Comprehensive
CVG-SW61CS
15’ CA-ITV-S15
25’ CA-ITV-S25
50’ CA-ITV-S50
15’ CA-ITV-S15
25’ CA-ITV-S25
50’ CA-ITV-S50
15’ CA-ITV-S15
25’ CA-ITV-S25
50’ CA-ITV-S50
*Extension Cable (Optional)
25’ CA-ITV-D-25
50’ CA-ITV-D-50
100’ CA-ITV-D-100
200’ CA-ITV-D-200
300’ CA-ITV-D-300
400’ CA-ITV-D-400
500’ CA-ITV-D-500
Cables > 500’ use Rs422 kit
10’ CA-ITV-V10
* For Plenum cables, use part number CA-ITV-DP-XXX (where XXX=feet).
* Remote Panel only
available with daisy
chain configuratio n
PORT 1 PORT 3
PORT 4PORT 4
Control Cable
6’ CA-ITV-DIN-6
25’ CA-ITV-DIN-25
PORT DESCRIPTION
1 SONY EVI-D100 CAMERA
2 NOT USED
3 VIDEO SWITCHER (CVG-SW61CS)
4 REMOTE PORT

Connect power, camera data, and video switcher cables to rear panel. The port marked 1 is the output for the
EVI-D100 CAMERAS 1-4. Daisy chain the EVI-D100 cameras from camera 1 through camera 4 using the data in
and out connectors on the EVI-D100’s using cables included. IMPORTANT: Do not barrel DB9 to 8 pin mini-
DIN to 8 pin mini-DIN to DB9 to make 8 pin mini DIN to 8 pin mini DIN cable. The port marked 2 is for the
document camera (NOT USED). The port marked 3 is the output for the VIDEO SWITCHER. The port marked 4
is for remote serial control. TURN THE CONTROL PANEL ON LAST.

Select CAMERA/VIDEO to be controlled by momentarily pressing the proper button (1 through 4). If a camera is
not present, the LED will blink for 4 seconds. To select another camera press any of the other camera selects. If
a VIDEO SWITCH is connected, video output will be on the selected camera.