Operating instructions

ManualsBrandsElmo ManualsSecurity CameraPTC-100S

Page 1

6 Leighton Place

Mahwah, New Jersey 07430

P: 201•848•9818 F: 201•848•9819

CP-ITV4-S

3-Axis ITV Control Panel

Telemetrics Control Panel for the Sony

EVI-D30, EVI-D70, EVI-D100, EVI-HD3V, BRC-300, BRC-700 and Elmo PTC-100

Pan/Tilt Video Cameras enhances function and value for

Teleconferencing, Educational, and Security Applications.

P/N 92 55418 102 – 11 REV -

FIRMWARE VERSION 55502 004 REV-

Summary of content (7 pages)

PAGE 1
CP-ITV4-S 3-Axis ITV Control Panel Telemetrics Control Panel for the Sony EVI-D30, EVI-D70, EVI-D100, EVI-HD3V, BRC-300, BRC-700 and Elmo PTC-100 Pan/Tilt Video Cameras enhances function and value for Teleconferencing, Educational, and Security Applications.
PAGE 2
CP-ITV4-S OPERATING INSTRUCTIONS System with Daisy Chain Wiring Interconn ect Cable 15’ CA-ITV-S15 25’ CA-ITV-S25 50’ CA-ITV-S50 Control Cable 6’ CA-ITV-DIN-6 25’ CA-ITV-DIN-25 Interconnect Cable 15’ CA-ITV-S15 25’ CA-ITV-S25 50’ CA-ITV-S50 Interconnect Cable 15’ CA-ITV-S15 25’ CA-ITV-S25 50’ CA-ITV-S50 *Extension Cable (Optional) 25’ CA-ITV-D-25 300’ CA-ITV-D-300 50’ CA-ITV-D-50 400’ CA-ITV-D-400 100’ CA-ITV-D-100 500’ CA-ITV-D-500 200’ CA-ITV-D-200 Cables > 500’ use Rs422 kit Remote Panel * Remote Pa
PAGE 3
 Operate PAN-TILT-ZOOM-FOCUS controls to obtain image desired. To operate focus, use the FR to focus a far object and the NR to focus a near object. If focus control is activated, the focus function will automatically switch from auto to manual to allow for manual focus control, the focus LED will turn off. To return to auto focus, depress the FOCUS AUTO/MAN button. To operate zoom rotate the joystick knob. Turn counterclockwise for wide view and clockwise for telephoto view.
PAGE 4
 The LOC/REM allows for control of a remote camera system. The local/remote function can only be used in systems using the daisy chain connection. This feature allows a remote serial device connected to port 4 of the ITV control panel to gain control of the cameras connected to the ITV panel. The remote device can be another CP-ITV control panel, computer, or other control source (AMX, Crestron, etc.
PAGE 5
 To ENTER PRESET, position camera to desired video image and depress selected preset shot switch or switches (1-6) for approximately 2-3 seconds. When the LED for that preset becomes lit the shot is memorized. To RECALL PRESET shot, depress preset switch or switches (1-6) for about a half a second. Some manufacturer’s cameras preset shots will remain in memory when power is shut off. Pan, tilt, zoom, focus, and focus mode (auto/manual) are memorized.
PAGE 6
Connector Pinouts: C A M 1 C A M 2 D C PWR AUX C A M 3 C A M 4 Serial Port Connector 1 5 9 6 9 D-SUB Male (Connector View) PIN# 1 2 3 4 5 DESCRIPTION N/C Receive Data Transmit Data N/C Ground PIN# 6 7 8 9 DESCRIPTION N/C RTS N/C N/C POWER CONNECTOR 5.1mm x 2.
PAGE 7
SONY EVI-D100 OWNERS PLEASE READ! To use the Sony EVI-D100 camera with the Telemetrics CP-ITV4-S3-Axis ITV Control Panel, the EVI-D100 must be set to work in EVI-D70 mode. You must place the EVI-D100 into EVI-D30 emulation mode. A switch is located on the bottom of the EVI-D100 to set the emulation mode. Please refer to the EVI-D100 manual. Please make sure that the baud rate for the camera is 9600 baud.