User manual

1.3.19.3.6. Configuring Direction alarm
The Direction Alarm detects any human/vehicle/object that moves in a predetermined direction and initiates an alarm.
Please note that the Direction alarm option will not be available for the overhead-mounted cameras.
Caution
Due to the background registration tech-
nique the persons, who remain in the same
position, without moving, for an extended
period of time will not be detected.
To configure Direction alarm, do the following:
1.
Choose Direction in the Alarm menu
2.
Choose the Direction drawing tool
3. Draw the detection zone in the live-view window
a. Left-click on the live view screen to define the starting point
b. Hold down the left mouse button and drag the cursor to set the end point. The arrow should point in the desired
direction.
c. To adjust the detection zone position on the screen, hold the left mouse button down and drag the selected zone
to the desired position.
d. To adjust the detection zone, click on start/end point, hold down the left mouse button and drag in the desired
direction to expand/shrink or change the direction of the CrossWire detection zone
e.
Click Undo to delete the last detection zone
f.
Click Clear to delete all detection zones for the selected camera
g.
Name the detection zone in the Direction field if desired
4.
Repeat steps 2-6 of the Area alarm setup
1.3.19.3.7. Configuring Passthrough Counter alarm
The Passthrough Counter alarm detects any human/vehicle/object that is moving in a defined direction, counts this motion
and stores it in the Access database.
Please note that the Passthrough Counter alarm option will not be available in the crowded locations.
Caution
Due to the background registration tech-
nique the persons, who remain in the same
position, without moving, for an extended
period of time will not be detected.
To configure Passthrough Counter alarm, do the following:
1.
Choose Passthrough Counter in the Counting menu.
2.
Repeat steps 2-3 of the Direction alarm setup.
OR
Repeat steps 2-3 of the CrossWire alarm setup.
3.
Repeat step 4 of the Area alarm setup.
95ELMO-PRO v.1.403.16 - User Manual
VideoLogix™Chapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/