User manual

3.
Configure the Idle Alarm Setting for the selected detection zone. Set the Period of Time, in hours,
minutes and seconds that an object is allowed to remain in the defined area. Once the person/vehicle/object stay has
exceeded the allowed period of time, the alarm will be triggered.
In the example below, the alarm will be triggered if the person remains in the defined area for 15 or more seconds.
1.3.19.3.4. Configuring Missing alarm
The Missing alarm tracks any selected object and initiates an alarm if the object has been removed/moved from its original
position. Available only with All Objects object type.
Please note that the Missing alarm option will not be available in the crowded locations.
To configure Missing alarm, do the following:
1.
Important
All Objects must be chosen in the Object
Type menu in order to activate Missing
alarm type.
Choose Missing in the Alarm menu
2.
Repeat steps 2-6 of the Area alarm setup
3.
Configure the Missing Alarm Setting for the selected detection zone. Set the Area Change Percent
(0% - 100%). The higher the number, the more profound the change in the defined area has to be in order to set off
the alarm. To detect the item being moved slightly from its original position, the Area Change Percent
number should be set to a lower value.
1.3.19.3.5. Configuring Stop alarm
The Stop alarm detects a human/vehicle and initiates an alarm if the detected human/vehicle stops in the defined area
for a period of time longer than that defined by user.
Please note that the Stop alarm option will not be available for the overhead-mounted cameras and in the crowded locations.
Important
Human or Vehicle must be chosen in the
Object Type menu in order to activate
Missing alarm type. Stop alarm will not
work with All Objects object type.
To configure Stop alarm, do the following:
1.
Choose Stop in the Alarm menu
2.
Repeat steps 2-6 of the Area alarm setup
3.
Configure the Stop Alarm Setting for the selected detection zone. Set the Period of Time, in hours,
minutes and seconds that a human/vehicle is allowed to stop for in the defined area. Once the person/vehicle stops
in the defined area for the period of time longer than defined by user, the alarm will be triggered.
In the example below, the alarm will be triggered if the human/vehicle stops in the defined area for 15 or more
seconds.
94ELMO-PRO v.1.403.16 - User Manual
VideoLogix™Chapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/