User manual

b.
In the Condition drop-down menu, choose “=” (equal to) in the drop-down menu and enter the desired number
of persons/vehicles/objects. This way the alarm will be triggered only if the specified number of persons/vehicles/ob-
jects is met in the defined area.
c.
In the Condition drop-down menu, choose “>=” (greater or equal to) in the drop-down menu and enter the
desired number of persons/vehicles/objects. This way the alarm will be triggered only if the specified number of
persons/vehicles/objects is met or exceeded in the defined area.
1.3.19.3.2. Configuring CrossWire alarm
The CrossWire alarm detects any human/vehicle/object that crosses the specified boundaries in a predetermined direction
and initiates an alarm.
Please note that the CrossWire alarm option will not be available for the overhead-mounted cameras and in the crowded
locations.
Caution
Due to the background registration tech-
nique the persons, who remain in the same
position, without moving, for an extended
period of time will not be detected.
To configure CrossWire alarm, do the following:
1.
Choose CrossWire in the Alarm menu
2.
Choose the CrossWire drawing tool
3. Draw the detection zone in the live-view window. A total of three CrossWire detection alarm zones can be drawn.
a.
Click on the live view screen to define the starting point
b. Hold down the left mouse button and drag the cursor to set the end point. The arrow in the middle should point
in the desired location.
c. To adjust the detection zone position on the screen, click on the desired detection zone, hold the left mouse button
down and drag the selected zone to the desired position.
d. To adjust the detection zone, click on start/end point, hold down the left mouse button and drag in desired location
to expand/shrink or change the direction of the CrossWire detection zone
e.
Click Undo to delete the last detection zone
f.
Click Clear to delete all detection zones for the selected camera
g.
Name the detection zone in the Area field if desired
4.
Repeat steps 4-6 of the Area alarm setup
1.3.19.3.3. Configuring Idle alarm
The Idle alarm detects a human/vehicle/object and initiates an alarm if the detected object remains in the defined area
for a period of time longer than that defined by user.
Please note that the Idle alarm option will not be available for the overhead-mounted cameras and in the crowded locations.
To configure Idle alarm, do the following:
1.
Choose Idle in the Alarm menu
2.
Repeat steps 2-6 of the Area alarm setup
93ELMO-PRO v.1.403.16 - User Manual
VideoLogix™Chapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/