User manual

c. To adjust the detection zone position on the screen, click on the desired detection zone, hold the left mouse button
down and drag the selected zone to the desired position.
d.
Click Undo to delete the last detection zone
e.
Click Clear to delete all detection zones for the selected camera
f.
Name the detection zone in the Area field if required. Enter the desired name in the text field under the live
view window.
4.
Set the Active Time for each detection zone. In the example below, the Area alarm is active from 8:00AM to
5:30PM.
Important
Active Time must be configured. Unless the
Active Time is set, object detection will not
occur in the selected area.
5.
Configure the Area Output Setting for the selected detection zone
a.
Check the Send Email checkbox to send an emergency Email every time that the alarm is triggered in this
detection zone. The email address must be configured in the Email Setup tab.
b.
Check the Audio Dial Out checkbox to make an emergency phone call every time that the alarm is triggered
in the Area.
Note
If the Audio Dial Out checkbox is checked,
the chosen *.wav file will be played as a
message for the emergency phone call.
c.
Select the Sound Wave File for the audio alarm
i.
Click the Browse button and locate the *.wav sound file that will play every time that the alarm is
triggered
ii.
Click Open
6.
Set the Duration of Sound (1 – 100 sec) to determine how long the *.wav file will play
7.
Configure the Area Alarm Setting for the selected detection zone by selecting one of the following conditions:
a.
In the Condition drop-down menu, choose any to trigger an alarm every time human/vehicle/object presence is
detected in the defined area.
92ELMO-PRO v.1.403.16 - User Manual
VideoLogix™Chapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/