User manual

1.3.19.2. Configuring VideoLogix™
Note
Each VideoLogix™ channel must be con-
figured separately.
To configure the common channel settings, do the following:
1.
In the Current Channel field, click the Browse button to select the desired analog video channel. Note that
VideoLogix cannot be configured on IP channels.
2.
Check the Enable VideoLogix checkbox to enable the VideoLogix™ module for the selected channel. In the
example above, VideoLogix™ is configured for Channel 1. Note that the maximum frame-per-second rate on the
channels configured for VideoLogix™ is 13 fps. When the channel is configured for VideoLogix, the frame rate is
automatically adjusted to 13 fps.
3.
Choose the Control # in the drop-down menu for the selected VideoLogix™ channel. When the alarm is triggered
on the selected VideoLogix™ channel, the configured control will be activated. In the example above, Control 1 will
turn on when the VideoLogix™ alarm is triggered on video Channel 1.
4.
Set Object Min Size. This pixel value is the minimum pixel height that the human form has to represent on
the live-view screen in order to be detected by VideoLogix™. By default, this value is set to the absolute minimum
value of 8 pixels. Any objects smaller than the selected object minimum size will not be recognized.
5.
If necessary, configure the environment for the selected channel. Check Overhead Camera checkbox if the
selected camera is facing downwards. Check Crowded checkbox if the selected camera is mounted in a crowded
location. Please note that only one of these two checkbox can be selected at any given time.
Note
The environment limitations, such as restric-
ted camera view due to the mounting loca-
tion or the crowded site will restrain Video-
Logix™ functionality. If Overhead Camera
is checked, only Missing and Passthrough
Counter alarm options will be available. If
Crowded is checked, only Direction alarm
option will be available.
6.
Check the Hide Detection Box checkbox in order to hide the detection box on the main screen.
After configuring the common channel settings, choose and configure the desired type of human/object detection.
90ELMO-PRO v.1.403.16 - User Manual
VideoLogix™Chapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/