User manual

Step 5: VERY IMPORTANT! CONNECT THE POWER CABLE TO
A UPS (UNINTERRUPTIBLE POWER SUPPLY). PLEASE NOTE: AN
UNINTERRUPTIBLE POWER SUPPLY (MIN. 500VA) MUST AL-
WAYS BE USED; OTHERWISE ALL WARRANTIES WILL BE
VOIDED.
Step 6: The system will power on automatically by default. If this does not happen, then
press and hold the power switch for 2 seconds. The power switch is located at the front of the
DVR (pin hole switch). The system will then power up.
1.1.7. DVR Back View
The following diagram displays the back of the DVR.
1.1.8. Key Features
The following is a list of all new features that can be found in ELMO-Pro Server Version. For a more detailed explanation
of features and functionality, refer to the appropriate section in the manual.
1. A channel oriented system design (as opposed to camera system design)
2. Supports three different views: Simple, Advanced and Tree View
3. Supports a total of up to 20 channels, 16 Analog and 4 IP Cameras (true IP cameras or via IP module). The number
of IP cameras is SPK key dependent.
4. Annexxus IP modules 101M, 104, and 204 are supported
5. Supports a maximum of 240 fps recording (SPK dependent)
6. In Live mode, Mux Display, the user can search recorded data while viewing live mode channels
5ELMO-PRO v.1.403.16 - User Manual
DVR Back ViewChapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/