User manual

8.
After the new IP camera has been added to the list, the following parameters may be adjusted. (Click the Save
button after adjusting any parameters).
a.
Resolution. Choose from 4 available resolutions. 320X240, 640x240, 640x480, 720x480
b.
FPS (frames-per-second rate). This fps setting is used for recording. This fps setting is also used on Live Mode
(Mux display), while IP camera is in the full screen mode. When any other screen division is selected, IP camera
will be displayed at 1-3 fps rate.
c.
User Name/Password. If the user name/password is incorrect, IP camera resolution will be adjusted to
"Disabled". This IP camera will then be treated as video loss on Live Mode.
d.
HW Channel. Each IP camera can be linked with any number of video Channels. In the example above,
Channel #1 will display IP Camera at 192.168.10.91; Channel 2 will display IP camera at 192.168.10.93 and
Channels #3-4 will display IP camera at 192.168.10.80.
The Video Channels can also be linked with IP cameras in the Hardware Setup tab. To link video channel to IP
Camera, select the desired IP Camera address in the Video drop-down menu.
Note
Each channel can be linked with only one
IP Camera at-a-time.
9.
While IP camera is selected in the All Cameras list, it is displayed in the live view window. The following inform-
ation will be displayed in the IP Camera Settings frame: camera's IP Address, Frames Per Second rate, and camera
current resolution.
83ELMO-PRO v.1.403.16 - User Manual
IP CameraChapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/