User manual

1.3.17. Intelli-Zone™ Setup

1.3.17.1. Overview

Intelli-Zone™ is a feature that allows the channel to intelligently pan, tilt, or zoom to a specified preset. The ELMO-PRO

Server will automatically detect if that channel has P/T/Z features and adjust the pan-, tilt-, or zoom- settings where ap-

plicable.

Important

This feature is not supported with IP Camera

To configure selected channel for Intelli-Zone, do the following:

Select the Channel # in the Current Channel frame. Click the Browse button to select the desired

channel from the list, selected channel will be displayed in the live view window.

Check Enable Intelli-Zone checkbox to enable Intelli-Zone module for the selected channel

Select Start Position preset. This is the position the channel will return to after the specified dwell time. Click

the Browse button to select the desired preset from the list. (Please see Programming Presets section for

more information).

Set Active Time to configure Intelli-Zone™ active time on the selected channel. Intelli-Zone™ will not work

outside of the Set Active Time. In the example above, Intelli-Zone™ will work from 12:00 AM to 11:00 PM on

Channel #1.

Note

Active Time will remain the same for all

detection areas on the selected channel.

Adjust Sensitivity. The higher the Sensitivity, the less change in an image is needed to set off the alarm. If the

Sensitivity is set to Low, the change in an image will have to be dramatic to be detected as motion. This function

only works properly indoors. The natural changes an outdoor environment (e.g. clouds) can cause false alarms.

78ELMO-PRO v.1.403.16 - User Manual

Intelli-Zone™ SetupChapter 1. ELMO-PRO Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/