User manual

To associate a backup with the specific sensor(s), do the following:
1.
Click Activate Sensor Backup
2.
In the new window, click the Browse button to select from 0, 5, 10, 20, or 30 minute(s) post-activation
recording time options.
3. Check the corresponding check boxes for the desired sensors that will be associated with the backup.
Note
The sensors must be enabled in Sensor
Settings in Hardware Setup - Sensor Set-
tings
4.
Click OK or click Cancel to discard changes and to return to the Setup.
5.
Click the Save button to save the configured settings
In the example above: When the Panic button is clicked, or sensors 1 or 8 are activated, the encrypted backup
will be created to the CD-R/DVD-R that will include 5 minutes of pre-activation and 10 minutes post-activation of video
recording (total - 15 minutes long).
To view the backup progress, enter the Search Mode by clicking the Search Mode button on the main screen or
by going to Tools -> Backup menu.
While the panic backup is in progress, the existing backup sessions cannot be edited/deleted and new backup sessions
cannot be created.
57ELMO-PRO v.1.403.16 - User Manual
System SetupChapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/