User manual
Caution
Unless Motion recording is set in the
Schedule Setup, the channel will not record
and motion will not be detected even if the
Motion detection target zones are con-
figured for this channel.
Important
This feature is not supported with IP camer-
as.
1.3.5.2. Setting up a target zone for motion detection
To set up a target zone for a specific channel, do the following:
1.
Select the Channel # in the Current Channel frame. Click the Browse button to select the desired
channel from the list, selected channel will be displayed in the live view window.
2. Draw the motion detection zone on the selected channel.
• Place the cursor at the starting point on the live view screen
• Hold down the left mouse button and drag to draw a rectangular area. Adjust the area if necessary
• Repeat steps 1-2 to configure up to 5 (five) motion detection areas.
OR
34ELMO-PRO v.1.403.16 - User Manual
Motion SetupChapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/